SPECIFICATIONS |
Main Card -- Motion
|
|
Number of axes: 1 |
|
Maximum absolute distance: 24bit(-8,388,608 ~
+8,388,607) |
|
Pulse range: 40pps ~ 60K pps. |
|
Output pulse signal: Two pulse(CW/CCW) mode or one pulse(
PULSE/DIR) mode |
|
Acceleration steps: 1 ~ 8192 steps |
|
3 homing modes. (Optional zero phase input from encoder
for accurate and absolute homing.) |
|
Limit switches: LS+,LS+,HOME, polarity
programmable. |
Main Card -- Digital Input |
|
4 Photo-coupler isolated inputs |
|
Polarity: non-inverting / inverting,
programmable |
|
ON state: 2.8Vdc(max) 4.5mA(min) |
|
OFF state: 8Vdc(min) 3mA(max) |
|
Switching speed: 2.2KHz max. ( with on board debounce
circuit) |
Main Card -- Digital Output |
|
5 Photo-coupler isolated outputs |
|
Polarity: non-inverting / inverting,
programmable |
|
Output range: Open collector 0 ~ 45 Vdc |
|
Sink current: 1A(cont) per channel |
|
Switching speed: 20KHz(max)(MOS out only) |
Main Card --
General |
|
Insulation
resistance:100 M Ohm (min) at 1000Vdc |
|
Isolation
voltage:2500Vac 1Min |
|
I/O connector
:One D-Type 25-pin female
connector |
|
External
supply:DC 24V±4V |
|
Operation temperature : 0 to +70 degree C |
|
Storage temperature : -20 to +80 degree C |
|
Operation
humidity: 5~95% RH, non-condensing |
|
Dimensions:175(W)
108(H) mm |
Wiring board |
|
External supply: DC 24V± 4V |
|
Specific input: 4 |
|
General input: 4 |
|
Special output: 2 |
|
General output: 5 relays (5A 250VAC, 5A 30VDC) with
LED |
|
Connector: One D-type 25-pin male connector |
|
Operation temperature : 0 to +70 degree C |
|
Operation humidity: RH5~95%, non-condensing |
|
Dimension: 126(W) 110(H)mm |