FEATURES |
|
3-axis
servo/stepping motor control |
|
Single or dual-pulse
mode |
|
Pulse range: 1
pps - 1 M pps |
|
3-axes linear
interpolation |
|
Accept 3 linear
scale feedback |
|
2 encoder input
for pulse handler |
|
Special
purpose I/O (LS+, LS-, HOME) |
|
2 D/I and 2 D/O
channels |
|
4 channel A/D
input for joystick and speed override |
|
Operatior's panel
interface: 20 key input, 6 LED status output |
|
Renishaw probe
trigger input |
|
Programmable bounce
back distance and speed at probe trigger |
|
Scale ratio formula |
|
Software
limit function |
|
Software
key function |
SPECIFICATIONS |
Main Card -- Servo
section
|
|
Control 3 Pulse
type servo driver sets |
|
Maximum pulse
rate: 1 M pps |
|
Programmable
acceleration / deceleration rate : 4 M pps/sec |
|
3 positioning
command queue |
|
Speed mode : from
joystick, pulse handler, PC command |
|
Programmable bounce
back distance : 0.1 - 6553.5 um |
Main Card -- Linear
scale section |
|
Accept
3 differential type quadrature square wave
feedback |
|
Maximum pulse
rate : 1 M pps |
|
Counter
length : 32 bits |
Main Card --
Pulse handler section |
|
Accept 2 quadrature
square wave input |
|
Counter
length : 8 bits |
Main Card --
Joystick section |
|
Accept
3 register type joystick |
|
A/D
accuracy : 12 bit |
Main Card --
Keyboard section |
|
Maximum
acceptable keys : 20 keys |
|
Key bebounce
time : 8 ms |
Main Card --
LED section |
|
Maximum
LED : 10 |
Main Card --
Renishaw probe section |
|
Direct
Renishaw input |
|
Programmable
probe status LED output |
|
Latch position
on the fly |
Main Card --
General I/O |
|
General
input : 2 photo coupler isolated input |
|
General
output : 2 relay out |
DIN rail mounted wiring board |
|
External
supply:DC 24V±4V |
|
On board
build-in s.p.s.: DC +5V 500mA (Max.) |
|
General
input : 2 with LED indicator |
|
General output
: 2 N-MOS (Sink 1A 120VDC) with LED indicator |
|
Specific I/O :
2 with LED indicator |
|
Connector:
One 68pin mini SCSI-II female connector |
|
Specific
servo control connector: 3 D-type 9 pin connectors |
|
Operation temperature : 0 to +70 degree C |
|
Operation
humidity: 5~95% RH, non-condensing |
|
Dimension :200(W)*107(H)mm |
SORDER
INFORMATIONS |
|
PRODUCT
|
DESCRIPTIONS |
1 |
MPC-3013 |
3-axis Motion Control Card for
Coordinate Measuring Machine |
2 |
MPC-3013DIN(N) |
DIN rail mounted wiring board for MPC-3013, General outpu t: 8 power N - MOS |
3 |
M266868150 |
68-pin SCSI II cable 1.5 M |
4 |
M266868300 |
68-pin SCSI II cable 3.0 M |
5 |
CMM control system |
IPC include MPC-3013 card |
6 |
CAD |
CMM machine measuring software |
7 |
Operator's panel |
Keyboard, joystick etc |
8 |
Servo cabinet |
3 axes servomotor, servo driver etc |
9 |
JD52000
|
Power
supply (s-35-24), input 115VAC 0.8A ; 230VAC 0.45A ,output
24V 1.5A
|