lichtzen-ae logo.gif

 

 

 

 

     LICHTZEN AE     AITNIX 

 

 

 

 

 

 

 

  Thinking high tech  

 

 

About us  |  E-mail  |  Board  |  Site Map

 

   

 

 

  Home > Automation > Inspection
img53.gif
  검사 시스템 (INSPECTION SYSTEM)

 

 

   HS-HDXT   HS-HDS   HS-HDB   HS-XL   HS-ECAB+   HS-LT+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

   

열화상 분석시스템

(THERMAL IMAGING : HS-HD-B)

 

 

HOTSHOT HD-B

 

 

 

Features

 -

Razor-sharp 640x480 Pixel Thermal Images

 -

Highest Thermal Sensitivity Available

 -

Thermal Visible Image Fusion

 -

LaZir-X - Dual Laser Target Highlighter

 -

Easy to Operate

 -

Zoom and Wide Angle Lenses (optional)

 -

Easy PC Connection

 

 

SPECIFICATIONS

 

 

Imaging Sensor

640 x 480 VOx Microbolometer

 

Sensitivity

50mK

 

Field of View

25?x 18? 0.4m (0.05캜)

 

Frame Rate

30Hz

 

Focus

Manual

 

Image Modes

IR/PIP/Fusion

 

Display

3.5" 640x480 LCD Touchscreen

 

Palettes

6

 

Temperature Calibration Range

-20캜 to 100캜

 

Accuracy

+/-2캜 or 2% (whichever is greater)

 

Spot Size Ratio

500:1 (standard lens)

 

Recording Media

Internal memory/CF card

 

Number of Images

512MB (600 HiRes Images)

 

Recording Modes

Snap shot/Sequence (optional)

 

Target Marker

Dual laser line target identifier

 

Battery

Rechargeable Lithium-ion

 

Operating Temperature

-5캜 to 50캜

 

Storage Temperature

-30캜 to 70캜

 

Shock

25G, IEC 68-2-29

 

Vibration

2G, IEC 68-2-6

 

Weight

2.7 lbs

 

Dimensions

7.5" x 7.5" x 3"

 

Digital Output

USB2.0

 

Video Output

NTSC

 

APPLICATION

 

 

Mold and Moisture Detection

 

There has been an increased awareness of the danger of mold in homes, office buildings and schools and the resulting health impact on individuals. The effect of mold on health is dependent upon the concentration of spores in the immediate area and the allergic reaction to the individual. Potential health problems associated with mold exposure can take the form of allergic reactions or asthma. In addition to incidental moisture egress, the near catastrophic impact of flooding on commercial buildings has created an entire remediation industry. Thermal imaging permits building owners and insurance companies to identify the extent of water damage, and, by delivering rapid drying or remediation services, to save in building restoration.

 

Roofing Inspection

 

Thermal imaging of flat roof systems is an extremely cost effective technique for evaluating the integrity of a wide range of built-up roofs and for ultimately reducing the cost of roof maintenance and repair. Proper maintenance must begin even before leaks are evident inside the building since surface damage to the outer membrane can cause water to be absorbed into sub-surface insulation layers. The amount of retained water can be significant and result in major structural deterioration near the leak location as well as to otherwise healthy roof areas. Thermal imaging techniques quickly locate the areas where retained moisture is trapped in subsurface insulation allowing immediate targeted repair of only the damaged areas. By exploiting the differences in thermal capacitance of moist and dry roof areas, retained moisture in these roof systems can be quickly located.

 

IMAGE GALLERY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Top of Page

 

 

   

DTX logo

경기도 시흥시 정왕동 1288-2 번지 동우디지털파크 A-512 |   E-mail : contact@dtx.co.kr  

Tel : 031-497-1134 (代)   |  Fax : 031-497-1138   |  All Rights Reserved, Copyright (C) DTX, INC. 2008

Tel : 031-419-6770 (영업부 직통)   |   Internet Fax : 0505-497-7710