레이져 마이크로메타 (LASER MICROMETER)

• Non contact measurement: moving parts, hot or soft, can be easily gauged, in such conditions that would be off-limits for any other instrument.
• Wide measuring range: parts of different size can be measured, without any pre-setting.
  Insensitive to product speed and vibration: the measurement can be performed on-line, during the manufacturing process.
• Absolute measuring concept: no “zeroing” is required when the part diameter is changed.
• High gauging speed and reduced beam spot size: it detects details that would escape a contact probe or an air ring, even on moving parts.
• On-Line application for 100% checking: “zero defect” manufacturing and proved Quality.
• Ideal sensors for the automatic process regulation: savings in raw material and manpower.
• Easy and quick gauging: reduced cost for off-line sample checks.
• Accurate and reproducible results, regardless of the operator’s experience.

• Permanent self-calibration: the measuring accuracy is guaranteed over time and periodical remastering is no longer required.
• Ultra high accuracy: ± 0.03 µm repeatability (T = 1, ± 3 s )
• Electronic linearization: the “error mapping” of each gauge makes it possible to compensate by software all errors due to optical aberrations
• High scan rate up to 2400 Hz, using a 16 facets polygon mirror
• Outstanding single scan repeatabilty: ± 1 µm, thanks to the internal data processing capability.
• Every single scan measurement result can be used and downloaded at a rate of 1200 or 2400 data per second.
• In many applications a single instrument can measure the diameter and detect flaws on moving products
• Excellent resistance to dust and dirt: skilled optical design and innovative edge detection technique allow to discriminate the part shadow from the dirt on the optical flats.
• Thermal stability: the highly stable construction and the thermal drift self-compensation allow accurate on-line measurement in workshop environment.
• New electronics, based on an ARM-7 type processor, 16Mb RAM / 8Mb Flash Memory, clock 74 MHz., FPGA (Field Programmable Logic Array 50,000 gates) and DSP (Digital Signal Processor) for high speed data processing.
• Linux embedded Operational System and Application Software in C language
• Fully re-programmable: the software in the gauge can be re-loaded to incorporate new performance or future releases.
• Two fast digital inputs for triggering signals, metre counting, etc.
• Internal digital sampling of the video signal: serial signal downloading for checking and teleservicing
• Fully digital, non-analog interface: no loss in accuracy due to transmission line, electric noise or A/D conversion errors.
• Use standard serial line: no dedicated or custom interface board inside the PC.
• Ready for networking: through the Ethernet or the RS485 line, several sensors can be linked to a host computer.
• Internal temperature check: a sensor measures the internal temperature and shuts the gauge down when the operating temperature exceeds the allowed limit.
• Fully compatible with ALS type gauges, to be used with Aeroel CE-10 or IBU-10 electronic Units.
• Industrial design: rugged and sealed construction (IP65) for industrial environment.
• Easy self-check: a multicolor LED with coded flashing sequences immediately identifyes possible malfunction conditions.
• Low voltage power supply: 24 VDC single ended, reduced power supply.
• Low power Laser emission: Class II laser equipment, conforming to USA and EU standards.
• High immunity to EMI: conforming to the high EU standards (CE).
• Made in Europe: the XLS series Gauges comply with the high Quality and Safety Standards set by the European Union.
• 3 year warranty: the solid state laser diode guarantees reliability and very long operational life. 

레이저, 게이지, 마이크로메타, 센서, 비접촉식, 스캔, 온라인측정, 검사, laser, gauges, gauge, gages, gage, micrometers, scanners, optical, sensors, contact-less, diameter, non-contact, on-line, measurement, control